GitHub

HydroDispatch

PowerSystems.HydroDispatch — Type
mutable struct HydroDispatch <: HydroGen
    name::String
    available::Bool
    bus::ACBus
    active_power::Float64
    reactive_power::Float64
    rating::Float64
    prime_mover_type::PrimeMovers
    active_power_limits::MinMax
    reactive_power_limits::Union{Nothing, MinMax}
    ramp_limits::Union{Nothing, UpDown}
    time_limits::Union{Nothing, UpDown}
    base_power::Float64
    status::Bool
    time_at_status::Float64
    operation_cost::Union{HydroGenerationCost, MarketBidCost}
    services::Vector{Service}
    dynamic_injector::Union{Nothing, DynamicInjection}
    ext::Dict{String, Any}
    internal::InfrastructureSystemsInternal
end

A hydropower generator without a reservoir, suitable for modeling run-of-river hydropower.

For hydro generators with an upper reservoir, see HydroReservoir

Arguments

  • name::String: Name of the component. Components of the same type (e.g., PowerLoad) must have unique names, but components of different types (e.g., PowerLoad and ACBus) can have the same name
  • available::Bool: Indicator of whether the component is connected and online (true) or disconnected, offline, or down (false). Unavailable components are excluded during simulations
  • bus::ACBus: Bus that this component is connected to
  • active_power::Float64: Initial active power set point of the unit in MW. For power flow, this is the steady state operating point of the system. For production cost modeling, this may or may not be used as the initial starting point for the solver, depending on the solver used
  • reactive_power::Float64: Initial reactive power set point of the unit (MVAR), validation range: reactive_power_limits
  • rating::Float64: Maximum AC side output power rating of the unit. Stored in per unit of the device and not to be confused with base_power, validation range: (0, nothing)
  • prime_mover_type::PrimeMovers: Prime mover technology according to EIA 923. Options are listed here
  • active_power_limits::MinMax: Minimum and maximum stable active power levels (MW), validation range: (0, nothing)
  • reactive_power_limits::Union{Nothing, MinMax}: Minimum and maximum reactive power limits. Set to Nothing if not applicable
  • ramp_limits::Union{Nothing, UpDown}: ramp up and ramp down limits in MW/min, validation range: (0, nothing)
  • time_limits::Union{Nothing, UpDown}: Minimum up and Minimum down time limits in hours, validation range: (0, nothing)
  • base_power::Float64: Base power of the unit (MVA) for per unitization, validation range: (0, nothing)
  • status::Bool: (default: false) Initial commitment condition at the start of a simulation (true = on or false = off)
  • time_at_status::Float64: (default: INFINITE_TIME) Time (e.g., Hours(6)) the generator has been on or off, as indicated by status
  • operation_cost::Union{HydroGenerationCost, MarketBidCost}: (default: HydroGenerationCost(nothing)) OperationalCost of generation
  • services::Vector{Service}: (default: Device[]) Services that this device contributes to
  • dynamic_injector::Union{Nothing, DynamicInjection}: (default: nothing) corresponding dynamic injection device
  • ext::Dict{String, Any}: (default: Dict{String, Any}()) An extra dictionary for users to add metadata that are not used in simulation.
  • internal::InfrastructureSystemsInternal: (Do not modify.) PowerSystems.jl internal reference
source